FS1010P 2.0

Name: 8-FE PoE Switch with 2 Uplink FE - Cudy Lebanon
SKU: FS1010P 2.0

8-FE PoE Switch with 2 Uplink FE

A wall-mounted 10-FE PoE switch with a 120W power supply and a silent cooling system.

8× FE with 802.at/af Mode A PoE

2× Uplink FE

120W Power Supply

Default/VLAN/Extend Modes

Watchdog under VLAN or Extend Modes

Desktop, Wall-Mount

200×118×44 mm (7.87×4.65×1.73'')

Model Version	FS1010P 2.0

10/100 Mbps RJ45 Ports	10
10/100 Mbps RJ45 PoE Ports	#1~#8
Max Power on a Single PoE Port	30W
PoE Port Notes	The PoE ports comply with IEEE 802.3at/af standards.
Extend Mode Ports	#1~#8
VLAN Mode Ports	#1~#8
LED	Power Link/ACT of Each Ethernet Port DIP Mode (SW)
Power Input	AC Inlet
Physical Buttons	VLAN/Default/Extend DIP Switch

Copper Speed and Distance	Cat. 3 or higher cable: 100 meters at 10 Mbps Cat. 5 or higher cable: 100 meters at 100 Mbps Cat. 5e or higher cable: 250 meters at 10 Mbps
Copper Speed and Distance Note	250-meter transmission is only available on the Extend Mode ports.
MAC Address Table	2048
Max Switching Capacity	2 Gbps
Max Forwarding Rate	1.488 Mpps
Packet Buffer	2 Mbit

802.3 Protocols

Grounding Methods	Three-Prong Plug
EMS	IEC/EN 61000-4-2, Level 2 ESD: Contact: 4kV; Air: 6kV IEC/EN 61000-4-5, Level 4 Surge: Power: DM 2kV, CM 4kV; RJ45: CM 4kV
Environment	Operating Temperature: 0~40 ℃ (32~104 ℉) Storage Temperature: -40~70℃ (-40~158 ℉) Operating Humidity: 10~90% non-condensing Storage Humidity: 10~95% non-condensing